You are in the last product of the category

Categories

PayPal

Warehouse Adhesive-Backed Floor Label

$ 50  tax incl.

WFLSQR

Adhesive Backed Warehouse Floor label Kits: A .125" thick aluminum frame with a full coverage special adhesive for adhering to warehouse floors and a 2.25" x 6" inset preprinted Metalphoto label (labels supplied unassembled). 

*The price is per Lable Kit

*Each order requires a $75 setup charge 


For quantity purchase and discounts please mail requirement to info@onpalms.com


Quantity:

Label Specifications:

 

  • Size: 2.25" x 6" Label
  • Packaging: Boxed
  • Missing Numbers: No 
  • Bar Code Height: TBD 
  • Sequential numbering: No

 

Data formatting fees are included in the price if numbering is sequential or a properly formatted Excel file is provided. Otherwise, a file formatting charge may apply.

Minimum charge for replacement parts is $150. We will price the exact mix of components at time of reorder. 


Installation

 

Application of the frame to the floor is best done when the temperature of the frame and floor are above 50°F.

 

Tools required to install

  • Stiff bristle brush

  • Greased Lightning® (or similar alkaline cleaner)

  • Paper Towels

 

Step 1

Clean floor where label is to be placed with Greased Lightning or other alkaline cleaner. For extremely dirty floors, consider using a Scotch Brite® pad with degreaser.

 

 

Step 2

Wipe up cleaner with a clean, dry paper towel.

 

Step 3

Wipe down surface with a clean, damp paper towel to remove any residual cleaner.

 

Step 4

Wipe up any surface moisture with a clean and dry paper towel.

 

Step 5

Remove the release liner and position the frame carefully before positioning on the floor because the frame will be difficult to reposition once contact has been made.

 

Step 6

Remove the release liner from the SO354 aluminum label and apply the label into the recessed area of the frame.

  

 

While the frame will adhere to the floor immediately, the bond strength will increase over the next 72 hours after application. It is recommended that the frame not be subjected to full warehouse traffic for the first three days.

Write your review

Warehouse Adhesive-Backed Floor Label

Warehouse Adhesive-Backed Floor Label

Adhesive Backed Warehouse Floor label Kits: A .125" thick aluminum frame with a full coverage special adhesive for adhering to warehouse floors and a 2.25" x 6" inset preprinted Metalphoto label (labels supplied unassembled). 

*The price is per Lable Kit

*Each order requires a $75 setup charge 


For quantity purchase and discounts please mail requirement to info@onpalms.com


1 other product in the same category: